Introducing Acumatica Cloud ERP: 2026R2
Technical discussions focused on Customizations for developers. See Low Code | No Code Forum for non-technical discussions
Recently active
Hi All,How to display all the list of preferred tech from attribute screen(CS205000) to service contract screen(FS305700).if i add the list for preferred tech here in attribute screen, that needs to be displayed as drop down in below attributes tab of service contracts screen, kindly pour your ideas.
I have a GI where I am joining AMMRPBucketDetailInq to INSite (joined by siteId) and to InventoryItem (joined by inventoryId). I am also grouping by siteId.I want the user to be able to select a warehouse, so I have set up a Parameter for INSite.SiteCd (NOT INSite.SiteId). When I execute, no matter what siteCD I enter, the GI displays all rows. It appears to be ignoring the INSite.SiteCd from the Parameter. The GI XML is attached.Thank you!
Hi,I’m a freshman to acumatica development. I followed some of recordings of Acumatica T series and started customizing a new screen for Pro-forma Invoices. Below screen shot shows what I have done so far. Now I need to add a button called Add Orders in the tab and when click on the button , pop-up a new window with all the available sales orders according to the customer ID (name) to be selected and add to the grid. Below screen shot taken from a different screen for the reference. In this scenario, following points are identified cases.how to add a button and when clicked on the button pop-up a new screen . Do I need to add this button as an action or any other way to do this? How to load data into the newly opened window.? Do I need to customize this screen as well? how to filter data in this newly opened window/screen according to the customer ID?It’s really appreciated if someone can suggest me a solution to achieve these steps.Thank You.
Hello Everyone,Have tried to enable the following field in contract management but I’m unable to.Kindly assist All responses will be highly appreciated.
Hi,I have customized a new screen for Proforma invoices and now I need to add data to a custom report and print according to the given parameters. First I created the custom report using report designer without adding any parameters and included in the customization project.then I created an action called Print Report to print the report when clicked on the button. *Destination screen is the Pro Forma Invoice Report which is the report screen (PI302000.rpx) After publishing the customization project , my customized screen is shown as below. Now I clicked on the print report button and first it navigated me to the PI302000 screen and when I run the report it gives me the report with all data without any issue. Then I Modified the report with a parameter (refnbr) and included into the customization project again and modified the action with the parameter also.Report designer schema builder Action properties of customization projectNow I Published the customization project and clicked o
The Reference Nbr. and Type Columns are switched for some reason I am currently working on a customization which uses a custom processing form to call a modified release action. The modified release action is as follows: public static void ReleaseProcess(List<ARPayment> list, bool isMassProcess) { ARPaymentEntry graph = PXGraph.CreateInstance<ARPaymentEntry>(); var docsToRelease = new List<ARRegister>(list.Count); foreach (ARPayment payment in list) { if (payment.Status == ARDocStatus.Balanced) { docsToRelease.Add(payment); } } if (docsToRelease.Count == 0) throw new PXException(PX.Objects.AR.Messages.Document_Status_Invalid); ARDocumentRelease.ReleaseDoc(docsToRelease, isMassProcess, null, (ardoc, isAborted) => { }); for (int i = 0; i < list.Count; i++) { if (list[i] == null) con
Getting the below error in one of the customizations. Code Snippet belowError: The entry form (ID: AR303000, title: Customers) cannot be automated. Failed to subscribe the event PX.Objects.AR.XXXExt::LocationExtAddress_CBranchID_CacheAttached in the graph PX.Objects.AR.CustomerMaint. The method signature looks like an event handler, but the cache LocationExtAddress has not been found in the list of auto-initialized caches. Remove unused event handlers from the code. public class XXXExt : PXGraphExtension<CustomerMaint.LocationDetailsExt, CustomerMaint.DefLocationExt, CustomerMaint.DefContactAddressExt,CustomerMaint> {[Branch(null, IsDetail = false, DisplayName = "Shipping Branch", BqlField = typeof(CRLocation.cBranchID), IsEnabledWhenOneBranchIsAccessible = true)] protected virtual void LocationDetailsExt_CBranchID_CacheAttached(PXCache sender) { }}
I am curious what is/are the very first graph(s) that are initiated automatically anytime a user logs in?
I have a GI that has many columns. I need some of these columns visible dynamically depending on what user needs and hide the rest at any given time. For example having a few tick boxes or a drop-down field on the header as parameters. I know in GI design Result tab we have a true/false visible setting that indicates by default a column should be visible on inquiry preview or not and user can manually add/remover columns to the result but I want to do it automatically/programmatically. I can design multiple GIs with desired columns but I would like to have only one to minimize maintenance and future changes like grouping, styling, sorting, filtering, parameters… Also I could create a new screen to have a grid with all columns then from graph set the columns visibility but the problem is I can not use this screen as side panel in the data entry screen I need it. That would be great for GI columns we could have visibility expression instead of a simple true false but it is not an option
Hello,While we are investigating this issue, we went to “System Queues Monitor” screen and observed this error: “Processing time threshold is reached or maximum number of records exceeded”. Attacheed screenshots for reference.In “Settings” tab of System Queues Monitor, below values are configured.Processing Time Threshold (s): 30Number of Records in Detailed Log: 100For now we have cleared the quque by clicking on “Clear Queue”. Can you please let us know, what are recommened values to be configure to avoid this issues in furure. Best Regards,Naveen B
I have added a new view to a graph extension, my expectation is that changes made to it would be persisted during the normal Save process. However, I am noticing that after the updates I do not believe my call to TimeActivities.Cache.SetValueExt is actually updating the cache. Why would this be?namespace GPGeneral.CR{ public class TimeCardMaint_Ext : PXGraphExtension<PX.Objects.EP.TimeCardMaint> { public static bool IsActive() => (true); public PXSelectJoin<EPTimecardTask, InnerJoin<CREmployee, On<CREmployee.defContactID, Equal<EPTimecardTask.ownerID>>>, Where<CREmployee.bAccountID, Equal<Current<EPTimeCard.employeeID>>, And<EPTimecardTask.ownerID, Equal<Current<EPEmployee.defContactID>>, And<EPTimecardTask.weekID, Equal<Current<EPTimeCard.weekId>> > > >> TimeActivities; protected void _(Events
Hello everyone,Have a nice day.Now, i'm having a problem add Account Name( BILL-TO INFO) in Tab BILLING of Customer on Screen CUSTOMERs to Popup Select-Customer as picture 2 on screen Sales Order.Picture 1: Desire picture 2: Can anyone guide me or have something they used similar for this kind of scenario.Thank you
I am trying to modify EP305000 / TimeCardMaint, by adding a new view that would show PMTimeActivity that are ‘Open’ or were not EndDate has been specified. I bleive by View works fine as it is used in a function Action, however it is not available in the Customization Editor, view the ‘Add Data Fields’ tab of the screen editor.What do you think the problem could be? public class TimeCardMaint_Ext : PXGraphExtension<PX.Objects.EP.TimeCardMaint> { public static bool IsActive() => (true); [PXViewName("Active Time Activity")] public PXSelectJoin<EPTimecardTask, InnerJoin<CREmployee, On<CREmployee.defContactID, Equal<EPTimecardTask.ownerID>>>, Where<CREmployee.bAccountID, Equal<Current<EPTimeCard.employeeID>>, And<EPTimecardTask.ownerID, Equal<Current<EPEmployee.defContactID>>, And<EPTimecardTask.weekID, Equal<Current<EPTimeCard.weekId>&g
On Account payable preference, Bill Numbering sequence.Currently can only allow a maximum of 15 characters.Kindly assist on how I can change that so as to allow 19 characters.Any kind of response will be highly appreciated.
I’m dealing with a situation on Invoices and Memos entry screen where the Applications tab data is generated from an action, which means that the View.Select() does not return the data. How can I see the records without using View.Select()
Hello, I am looking for a table that logs the oldest items in system (which means the receipt date is earliest and qty on hand >0). I found table INReceiptStatus and INCostStatus might contain the data I want. But both of them do NOT look totally right. For example, For INReceiptStatus it lacks receiptNbr “007658” While for INCostStatus it lacks more receiptnbr, and even worse, it did not track the right receipt date. Can someone tell the logic on manipulating the two tables? Or if can point me the right direction for the data I am looking for, that would be even better.
I am using this loop to get the values of a generic inquiry. the requirements it needs to loop all columns in the Inquiry in order and get the value of each column. The code below is working but only for fields in the Generic Inquiry that are based on an actual Field. So if I have a field I put in the Caption “Field” and the formula = ‘Test’ it doesn’t bring back Test as I would expect, it brings back “” - no value? When I preview the data I see ‘Test’ but when pull the data using below I get ‘’Any clue would be appreciated. foreach (GenericResult resultRow in graph.Views["Results"].SelectMulti()) { foreach (string key in resultRow.Values.Keys) { foreach (GIResult resultMap in PXSelectReadonly<GIResult, Where<GIResult.designID, Equal<Required<GIResult.designID>>, And<GIResult.objectName, Equal<Required<GIResult.objectName>>>>>.Select(graph, new
I have this code that is used to determine if a field on a row is enabled based on the value of another field on the same row. If the value if the first field changes, that can change the enabled status of the second field. protected void _(Events.FieldSelecting<MyDAC, MyDAC.secondField> e, PXFieldSelecting baseMethod ){ if (baseMethod != null ) { baseMethod(e.Cache, e.Args); } MyDAC row = e.Row; if (row != null) { if (row.firstField == true) { PXUIFieldAttribute.SetEnabled<MyDAC.secondField>(e.Cache, row, false); } }}However, the PXUIFieldAttribute line of code shows an error PX1070: The state of fields and actions can be configured only in the RowSelected event handler.This code will compile and it works. So my question is, is the logic used to trigger the PX1070 incorrect? Or is there a more correct way to achieve this goal? Or do I just ignore PX1070 in this case?
Hay guysDoes anyone have an opinion on the best way to press two action buttons from another graph on a graph extension?More Specifically I want to press the “Print Courier Label” action button and the “Confirm Shipment” action button from my pick/pack/ship screen.Do I need to bite the bullet and learn how to edit the ASPX page?Or can I trigger it in a graph extension? I tried using an event handler, but I must have done it wrong, couldn’t get it working. I couldn’t get it working in the workflow editor either as the existing actions are on the Shipment screen and I want to Action them from the pick/pack/ship screen. If someone could steer me in the wright direction I can figure out the rest, i.e., what type of methodsThank you
I have created a custom field on the Adjustment screen which I want to use to override the default location when adding an inventory item in the details tab.How do I reference the extension to get the custom field from the summary section from an event (INTran_InventoryID_FieldUpdated) in the details section?I am used to using the following to get the extension:INRegisterExt iNRegisterExt = PXCache<PX.Objects.IN.INRegister>.GetExtension<INRegisterExt>(row);but row is referring to the detail row and not the summary section. What do I put instead of row?I hope this isn’t confusing and thanks for any help you can provide,Phil
Hi guys, I have a small problem, the GetProcessDelegate method works in the old version, but in this new version it doesn't give an error.here is the code.protected void PrintChecksFilter_RowSelected(PXCache sender, PXRowSelectedEventArgs e, PXRowSelected del) { var row = (PrintChecksFilter)e.Row; if (row == null) return; if (del != null) del(sender, e); var processDelegate = (PXProcessingBase<APPayment>.ProcessListDelegate)Base.APPaymentList.GetProcessDelegate(); }
I have a situation where I would like to conditionally allow users to use the ‘Release’ action on Invoices and Memos, even though their role does not permit them to do it normally. I tried action.SetEnabled(true) and action.SetVisible(true) in the RowSelected event, but this is not working.
Hi Community!,I’m trying to add deault staff names to calendar Board from Service Orders default staff tab , I’m unabel to find a way to add FSSOEmployee DAC to the list is there any specific way or process to add it.
Hello, I want to implement an approval map in a custom screen but I can't do it, I found this linkhttps://stackoverflow.com/questions/32400353/how-to-work-with-assignment-and-approval-maps-in-acumatica-via-automation-stepsbut with this example when I want to create a new document that will be approved I get the error“Object reference not set an instance of an object” I also found this other linkhttps://www.acumatica.com/blog/implementing-approval-process-on-custom-screens/but the information is incomplete and a bit outdated
Hello everyone. We use the cloud version of Acumatica. We have a VAR and also work with MaxQ, and they both provide custom solutions in the form of customization projects. We also have two internal teams that create customization projects for managing our systems integrations with Acumatica. So, we have multiple sources of customization projects and a fairly frequent need to publish them. When we publish, we need to disable our systems integrations and schedule an Acumatica lockout so that users are out of the system and don’t lose their work when the website restarts. This means that we’re either locking out users during business hours, or frequently working outside of business hours to publish. Is there any alternative to this? How do other folks manage their need to publish customization projects?Thanks, Dave
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.