Have anyone can provide the Datawedge configuration to parse GS1 barcodes to Acumatica?
Solved
GS1 using Zebra TC devices, Datawedge configuration
Best answer by indigomex
I found the solution to Parse a QR, Datamatrix and GS1-128 barcodes in Acumatica, and also all the steps necesary to read Code30, and all the symbologies outside the GS1 Parsing.
This solution applies to any Zebra TC5X and up
+4
Not sure if this is what you are looking for, but I found this on Zebra’s support website.
https://support.zebra.com/article/000034057
Hope this helps.
Ed
Translate
Thank you so much for the answer, but there is a problem, Acumatica needs a special configurarion in Datawedge to parcing the GS1 into acumatica app. CypherLab and Zebra don’t work “out of the box” every scanner device has it’s own configurarion, what I need it’s the exact Datawedge configuration to working with GS1 in acumatica.
I have another WMS android app and the company that develop that app send us the exact Datawedge configurartion in order to use the android app.
And I wonder if acumatica are aware of this sutuation since there is some other users on acumatica that succesuful deploy zebra devices using acumatica.
I know Datawedge very well and since I deployed several android app’s running diferent ERP and WMS without any problema with the right configuration.
Any help will be appreciated.
Translate
I found the solution to Parse a QR, Datamatrix and GS1-128 barcodes in Acumatica, and also all the steps necesary to read Code30, and all the symbologies outside the GS1 Parsing.
This solution applies to any Zebra TC5X and up
Translate
Hi
Translate
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.