We are setting up our locations in Acumatica, and are using the Avalara address validation tool. When we set up a location, the address and LocationID is the same as we are using in Avalara, yet the “Validated” button within Acumatica is framed in red and unable to be chosen. Has anyone experienced this? If so, and if you know how to repair, I would be grateful.
Best answer by hkabiri
In case there is any suggested change you can change the part of address and save. Once saved the Validated should be checked. This is the same on all other screen which has the validation enabled.
| Validate Addresses | Validates the warehouse addresses through integration with a specialized third-party software or service. |
+8In case there is any suggested change you can change the part of address and save. Once saved the Validated should be checked. This is the same on all other screen which has the validation enabled.
| Validate Addresses | Validates the warehouse addresses through integration with a specialized third-party software or service. |
I am testing this with Acumatica 24 R2, and I cannot find an option for “automatically accept corrected address”.
For example, I have an address of 123 South Main Street, and the correct address is “123 S Main St”. The user interface shows me in the little popup that it is wrong, but I cannot find an option to accept the change. I’m forced to re-type the data manually, and the little popup disappears when I move the mouse.
I have to be missing something; it really isn’t useful as I’m seeing it.
Thoughts?
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
