Community
Discussion Forums

Discussion Forums

Get inspired and gain all the knowledge you need

15441 Topics

Most replies

Recently active Most views Newest first

DavidEichnerCaptain II

asked in Low Code | No Code Customizations or Integrations

How to display item photo in generic inquiry for mobile app

I have a GI that connects InventoryItem to NoteDoc and then to UploadFile. I would like to display the attached image in the generic inquiry so that it can be used on the mobile app. Is there any way to do this?

3 days ago

ltussing03Captain II

asked in Reports and Generic Inquires

Barcodes cannot be scanned

Hello.We are having issues with barcodes generated from Report Designer.While we are able to scan these barcodes locally, the client cannot consistently scan them.For instance, on the production order form, they can scan some, but not others.And in General, the barcodes being printed are not crisp and clean.The client does not like the aesthetics of these slightly blurry barcodes.We have played with all of the barcode settings. The image below is not the current settings, I am just including it here to show where we have been working. Are there any other settings/properties in Report Designer that could allow us to improve the quality of the barcodes being printed?

3 days ago

dsimmerlySemi-Pro III

asked in Configuration and Installation

Device Hub printing 2 copies of label

Customer is reporting that when printing carrier labels from Easy Post to Device Hub there are 2 copies of the same label printed - there is only one job created - the printer is configured to print 1 copy - is has been confirmed the zpl label file only contains only one label - the printer has been reset What could cause this issue? How can this be resolved

3 days ago

rhooper91Varsity III

asked in Develop Customizations

Custom Long Operation on Sales Order disables Shipping_Contact Fields

Hello,I have a custom long run in a IEnumerable action and upon return, the Shipping_Contact fields return as disabled. Currently, I have to manually cancel the order to re-enable them- see below for my code:public PXAction<SOOrder> CustomAction;[PXProcessButton(CommitChanges = true, Category = "Processing", DisplayOnMainToolbar = true, Connotation = PX.Data.WorkflowAPI.ActionConnotation.Success)][PXUIField(DisplayName = "Custom Action", MapEnableRights = PXCacheRights.Select, MapViewRights = PXCacheRights.Select)]public virtual IEnumerable customAction(PXAdapter adapter){List<SOOrder> list = new List<SOOrder>() { Base.Document.Current };Base.Persist();PXLongOperation.StartOperation(Base, delegate (){ /*Logic*/ });return list;}To say I tried it.. I have tried adding Base.Cancel.Press(), Base.Shipping_Contact.View.RequestRefresh(); right before returning the list but as I expected, this does not work. I figure this is because the IEnumerable return overrides anything I

2 days ago

jhouserPro I

asked in Reports and Generic Inquires

Limit Requests primary list by department of current user

I need to limit Requests view so employees can see their own Requests or those of employees in their department (field on Request). I can easily limit users to their own requests using RQRequests.CreatedByID = @Me in the GI condition. But I need the equivalent of “Or RQRequests.DepartmentID = @Me” . Problem is, @Me doesn’t work for DepartmentID field. Does anyone know how I can accomplish this?

2 days ago

aleclFreshman II

asked in Reports and Generic Inquires

Broken Reports

Hello, I recently made a copy of a report and uploaded it to the server and it broke both the original and new report. All I did in the new report was hide fields. The steps I took are listed below. Am I missing something critical that would make both reports break? I would appreciate any advice you can give me. -Download original report (PM651500)-Rename it and save it to another file location (new name PM651550)-Hide fields-Upload to the server with the new report name -Create the site map location copying the original except for changing the screen name to PM.65.15.50 and the URL to match the screen name -Grant access to the new screen Thanks!

2 days ago

Surinder

asked in Everything Else

How do i see a users activity

hello, I am trying to see a history of exports done by a user as well as see what data users are exporting is there a feature in acumatica that allows this.

2 days ago

dougmcbride79Semi-Pro I

asked in Retail

Cconnect a Acumatica tenant we use for testing to a test Big Commerce website Sandbox?

We have two Acumatica Tenants. The first Tenant is our live Production Acumatica Tenant. The second Acumatica Tenant is our “test tenant” we use to train employees. Our live Production tenant is connected to our live production Big Commerce Website. I want to connect our second Acumatica Test Tenant to a second Big Commerce Sand box. And leave this connection permantly in place to do testing. Can I connect my Second Acumatica test tenant to a second Big Commerce website Sandbox? Is there risk of polluting of messing up my orginal live connection?

1 day ago

Debbie BaldwinAcumatica Product Manager

posted in Manufacturing

How is COVID-19 impacting the Shop Floor?

We have all felt the impact of COVID-19 on our personal lives, but how has COVID-19 impacted your Shop Floor Operations? What types of changes have you had to make in order to accommodate social distancing?

3 years ago

Jp89

asked in Everything Else

How do I see the progress on my previous ideas submitted on the old forum?

3 years ago

Jp89

asked in Community site discussions

Can we attach files and videos to topics?

3 years ago

Angela Bloomer ConstructionAcumatica Director of Product Management

posted in Field Service

Field Service Mobile Devices

As mobile capabilities expand and become a critical part of your business, what types of devices have you deployed? Do you have them mounted in the vehicle? Any extra add-ons for durability? What features have you found most useful?

3 years ago

ray20Captain II

asked in Distribution

Why @reportID in Purchase Receipt Automation steps is different than other screens

Hello, Take invoice screen in automation steps for exampleIf I want to add a new report button, I can use fill with values, and set the value to whatever screenID as I wish. However, when I come to purchase receipt screen. I can NOT add a new report as I wish. Why is not? How can I solve it? How can I add a new report print functions on purchase receipt screen. Thank you in advance.

3 years ago

franciscocazarin06

asked in Reports and Generic Inquires

Dependent Shipment parameter on report.

Hello,I’m working on a report that must print the labels for a specific shipment, I have Shipment Nbr, Item ID and Lot Nbr parameters, and I would like to have the report knowing the Inventory ID or LotNbr once the Shipment Nbr value on parameter is entered.The report is working fine if I know the lots or inventory id associated to the shipment, but I would like to have those values displayed associated to the Shipment #. Do you have any guidance on it?

3 years ago

rodmanFreshman I

asked in Community site discussions

MYOB Customers

Loving the new community. I’m going to send a message out to the AUGForums.com community (which will now pivot to focus on reporting in Acumatica) about this new Acumatica community. Before I do, I want to confirm that it’s ok for anyone to create an account, including MYOB customers, many of whom participate on AUGForums.com.

3 years ago

hsarjapurVarsity I

asked in Reports and Generic Inquires

How to show Google maps in a wiki?

How to show Google maps in a wiki and expose that Wiki on dashboard? We can add google maps script to show up in Wiki page but would like to see if we can add that wiki into dashboard Wiki component and show on the dashboard.

4 years ago

Brian StevensPro III

posted in Everything Else

Customization Project - Screen Controls Help

As many of you know, I’m one of the newest members of the Acumatica Developer community, although far from new to development for ERP systems. One of my ways of learning is to come at the problem backwards. For instance, the training guides for developers is very good at walking you through a perfect case scenario to teach, but there is a wealth of information that cannot be packed into the training guides without turning it into a new Library of Congress. By looking at code samples, I learn new methods and techniques to accomplish my goals. Sometimes, I even have to dig into the finished HTML presented to the browser… like today. I have been picking my way through properties of controls in the Screen Editor for quite some time, simply looking at what one screen sets to get similar behavior on my screen. This has been useful, but what about all those other controls? I find myself looking through properties to see what the help line tells me about each one, but I have not found a

4 years ago

Keith RichardsonVarsity II

posted in Everything Else

Integration for the blog posts/news posts?

I can assume this site is disconnected from the main website. It would be a great idea to have each of the blog posts create an attached post here for comments and discussion. It would also drive people towards the community and gain content.

4 years ago

faridemri52

posted in Everything Else

Grid Auto Populate Column

Hi ,Based on the title as above, does anyone here do any auto populate column to their grid ?I wanted to auto populate based on my selection, and the column is not from the DAC view grid. Because if it’s based on current DAC view, I can auto populate it by hide/unhide the column.

3 years ago

lbrewsterFreshman I

posted in Financials

Include PO Receipt so it works with new AP OCR Recognition

The new AP OCR ML feature is great if you are only using AP bill processing. Many clients have purchasing/receiving and it would be great to incorporate an option to select if the AP bill is related to a PO so the receipt information can be pulled into the bill.

3 years ago

GJensenFreshman I

asked in Distribution

Changing Price / Cost Decimal Places Negative Impacts

Our customer has started to use discounts extensively and originally we setup 6 decimal Price / Cost because it allowed us to match to the current price structure which is specific for almost each customer. We have learned that this causes rounding issues when unit of measure conversions are introduced. We have an opportunity when publishing the new price sheet to clean up some of this rounding by changing to a 2 decimal Price / Cost setting in Company miscellaneous settings. In our testing this appears to correct many rounding issues. Has anyone seen negative impacts in the transactions by reducing the number of decimals? All input is appreaciated.

4 years ago

saikiranb36Freshman II

asked in Configuration and Installation

Very frequent issue

Can someone help me out with is. How can we solve this.

3 years ago

KurtBauerJr Varsity III

asked in Develop Customizations

Add AddressLine3 field to all forms

Is there an easy way to add the AddressLine3 to all forms? We have several implementation, especially those from Sage 90/100, where clients use AddressLine3 and we have to customize all the different screens with address fields to add the field. This would also be a great Acumatica GitHub package to allow partners to download.Thanks,Kurt Bauer

3 years ago

ray20Captain II

asked in Financials

Is it possible to do Document like SO/Invoice profit adjustment?

Hello, We are calculating commissions based on profits of each AR document.For example, if the total prices of 1 invoice is 1000, and the total cost of all the items on invoice is 800, then the commission would be calculated based on 200. However, we encountered a case:We did oversell for 1 item, such as item A. and Item A has 0 qty and 0 average cost in system. Supposing, we sold 10 cases item A at price $100, since item A has 0 average cost and 0 ARtran cost, the profit for Item A is calculated to $1000. which is not right in the real world. The next day, we did receipt on item A with unit cost $80. So the total profit of item A on that invoice should be only $200. Is there a way for us to adjust that profit? If we can not do it on that single invoice, can we do a combination of several docs to adjust?

4 years ago

dheyaaqaddoFreshman I

asked in Reports and Generic Inquires

Swing subtotals on Sales analysis report

I have created a sales analysis query using sales analysis.My query showing Customers - products - qty sold and amount of sales.I am trying to make the report provide total per customer, I can see that when I collapse the customers but do not see the total when taking the report to excel, any one experience on solving this issue?

3 years ago

Page 455 / 618

Badge winners

tarashas earned the badge Easy talker
hkabirihas earned the badge Import and Export Scenario expert
aiwanhas earned the badge Acumatica expert
rfrantzhas earned the badge Easy talker
WillHhas earned the badge Easy talker

Show all badges

Terms & Conditions Cookie settings

Sign up

Already have an account? Login

Social Login

Login to the community

Social Login

Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.

Enter your e-mail address

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.